We now offer three versions of the Pugsley fork. All are CroMoly steel and allow ample clearance to fit a whopping 4″ tire. Two versions are spaced 135mm between the dropouts. Of these, one is offset to match the the Pugsley frame, and the other is non-offset 9no curvy leg). The third fork is spaced for a standard 100mm front hub.
All three have 51mm disc caliper mounts. The offset fork requires the use of a rear disc caliper adapter. The two non-offset forks require the use of a front caliper adapter if using disc brakes. And (now pay close atention) the two 135mm forks both use rear hubs.
All three forks also have removable cantilever pivots, spaced 120mm apart (specifically for use with our 65mm Large Marge rim). Note that V-brakes won’t work because the arms are not tall enough to allow the cable to clear the tire, so if you’re using rim brakes you must use cantilevers. All three forks sport fender eyelets at the dropouts, upper and lower barrel mounts, cable housing guides, 1-1/8″ threadless steerer, and they are powdercoated black.
Axle-To-Crown: 447mm
Rake: 43mm
Steerer: 260mm
Weight: 2.52 lb (1.14 kg) uncut
